ŠAPA VPENJALNA Z EKSCENTRIČNIM VIJAKOM MITEE-BITE
Item
FF3917
Clamping claw
Že od
73,30 €
| Dimenzija A | 50 mm |
|---|---|
| Dimenzija B | 28,4 mm |
| Dimenzija C | 16 mm |
| d | 25,5 mm |
| Dimenzija E | 9,6 mm |
| Ekscentrični pomik | 2 mm |
| Vpenjalna sila | 18 kN |
Draw-down clamping claw with eccentric screw
Universal clamping system for clamping from all workpiece shapes, whether square, diagonal, concave or convex.
Design: The special feature of this clamping device is the steel screw (strength 10.9) with the eccentric head. The eccentric tappet gives the clamping motion a very high clamping force. A hexagonal brass disc serves as clamping piece.
Application: All workpieces with the most varied shapes can be clamped with retaining studs and 1 or 2 clamping screws. The small installation height enables machining the workpiece surface without problems. Thus, the position of the clamping claws does not have to be taken into account in CNC programming work. In addition, the compact dimensions allow space-saving multiple clamping. The tension clamps can also be used as dog.
Design: With tempered T-slot nut and hardened clamp disc.
Application: The clamping screw can be rotated so that processed workpieces can be clamped without damage using the smooth side. In addition, sawn parts, forged parts or cast parts can be clamped using the serrated edge. The workpiece is pressed against the base support by the draw-down effect. The clamp disc adapts to the workpiece angular position, thus also non-rectangular workpieces can be clamped.
Universal clamping system for clamping from all workpiece shapes, whether square, diagonal, concave or convex.
Design: The special feature of this clamping device is the steel screw (strength 10.9) with the eccentric head. The eccentric tappet gives the clamping motion a very high clamping force. A hexagonal brass disc serves as clamping piece.
Application: All workpieces with the most varied shapes can be clamped with retaining studs and 1 or 2 clamping screws. The small installation height enables machining the workpiece surface without problems. Thus, the position of the clamping claws does not have to be taken into account in CNC programming work. In addition, the compact dimensions allow space-saving multiple clamping. The tension clamps can also be used as dog.
Design: With tempered T-slot nut and hardened clamp disc.
Application: The clamping screw can be rotated so that processed workpieces can be clamped without damage using the smooth side. In addition, sawn parts, forged parts or cast parts can be clamped using the serrated edge. The workpiece is pressed against the base support by the draw-down effect. The clamp disc adapts to the workpiece angular position, thus also non-rectangular workpieces can be clamped.