Sabre saw blade S 922 EF Pack w. 25 pc. Bosch
Item
FF2748
Sabre saw blade
Že od
90,90 €
| Material | Bimetal |
|---|---|
| Vrsta zoba | 1,4 mm |
Sabre saw blade wood with metal
Saw blade quality:
Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. The area of application covers wood, metal, non-ferrous metal and aluminium.
Tooth design:
Teeth milled, fine cut side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.
Use: For thin metal sheets, pipes/profiles.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals), turpentine (for aluminium) or water (for plastics, Perspex etc.), is recommended in order to extend the wear-resistance of the saw blade.
Design: 25 pieces in a plastic box.
Suitable for: All saber, reciprocal and tiger saws with standard shank.
Saw blade quality:
Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. The area of application covers wood, metal, non-ferrous metal and aluminium.
Tooth design:
Teeth milled, fine cut side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.
Use: For thin metal sheets, pipes/profiles.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals), turpentine (for aluminium) or water (for plastics, Perspex etc.), is recommended in order to extend the wear-resistance of the saw blade.
Design: 25 pieces in a plastic box.
Suitable for: All saber, reciprocal and tiger saws with standard shank.