LIST ŽAGE VBODNE T141HM SPECIAL FORMAT
Item
FF27350110
Jigsaw blade, 4317784121903
Ni na zalogi
14,50 €
Les
– mm
| Bosch št. | T 141 HM |
|---|---|
| Dolžina reza | 74 mm |
| Material | Karbidna trdina |
| Plastika | 5–50 mm |
| Vrsta zoba | 4,3 mm |
| Vrsta zoba | HM tovarniški standard, side clearance |
Jigsaw blade for special applications
Saw blade quality:
Solid carbide factory standard: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as fibreglass-reinforced plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set. Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.
Use:
Specially designed for GRP, plasterboard, cement fibre boards.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals), turpentine (for aluminium) or water (for plastics, Perspex etc.), is recommended in order to extend the wear-resistance of the saw blade.
Design: 1 pieces on card.
Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.
Saw blade quality:
Solid carbide factory standard: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as fibreglass-reinforced plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set. Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.
Use:
Specially designed for GRP, plasterboard, cement fibre boards.
Application:
Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals), turpentine (for aluminium) or water (for plastics, Perspex etc.), is recommended in order to extend the wear-resistance of the saw blade.
Design: 1 pieces on card.
Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.